Alien Abduction Lamp The Original UFO Flying Saucer LED Night Light

FREE Shipping

Alien Abduction Lamp The Original UFO Flying Saucer LED Night Light

Alien Abduction Lamp The Original UFO Flying Saucer LED Night Light

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


There is a light bulb inside the UFO top which illuminates the windows and glass beam creating a wonderful effect. The possibility of alien life is quite interesting and it can be easily seen on the beloved pop culture depictions in movies. Keep in mind that anyone can view public collections - they may also appear in recommendations and other places.

The ratings/reviews displayed here may not be representative of every listing on this page, or of every review for these listings. Mac was super affectionate and loved to crawl right up on top of me and lay on me while I was watching TV.A drill bit of the same diameter was fished out of my drill bits box, and I managed not to injure myself drilling a hole in the bottom of the cow for the piece of sprue to fit into. In this picture, you can see the battery holder leads attached to the resistor and the PCB on the left, and the two switch leads on the right.

With the plate mounted to the top of the abduction beam (the acrylic glass), it's time to fit the lights to the reflector.While pretty neat, I felt my Alien Abduction Lamp could do with some improvements and a couple of finishing touches. The sprue was then glued to a small piece of flat sheet plastic to keep it vertical, and left to dry. An examination of the miniscule little switch on the back of the PCB board proved it wouldn't be of much use, so I decided to remove it and run wires to a new switch. The circle of indoor/outdoor carpet shown in the picture above ended up looking too small under the finished lamp, so I replaced it with a larger circle when I was done.

The design is similar to the craft built by the Raytheon Technologies Corporation and often mistaken as "Alien" craft. The ray is enhanced by pigment added to the glass, allowing for the use of a low wattage bulb to achieve the same effect of a much more powerful spot lamp. Here the battery pack leads have been connected to the connector pins on the barrel of the switch, which can be seen protruding from the inside of the bowl, which, sadly, I neglected to paint (the inside of the bowl, not the switch). After the main large hole has been cut out and cleaned up, use a file to make the three half-round clearance holes for the reflector mounting screws, and you're done fabricating the plate.

In a galaxy far, far away, superior beings have engineered, and hand assembled an out of this world table lamp for you to enjoy. Doesn’t matter if you’re the geek of town or just a UFO fan, your desk or table will be looking great. You can put a regular light bulb inside for normal lighting, or put in a creepy red or green bulb in for a really cool alien effect! During the construction process I managed to destroy both of the acrylic glasses AND the bowl, so I had to go back and get another set of glasses, and at the same time, discovered that Safeway had holiday bowls of almost the exact shape I was looking for on a close-out sale, so I got one of those to replace the one I had broken. An energy efficient touch control colour changing LED lighting, giving a Polaris effect similar to your planet's Northern Lights or stealth mode if you need to avoid detection.

If you're running a script or application, please register or sign in with your developer credentials here. The inner set is used for mounting the reflector in place, and the outer set is used to screw the plate in place on top of the glass. I marked the location of the three mounting holes at 120 degree intervals arond the edge of the bowl, propped up the lip of the bowl on a block of wood so the drill bit would have a solid surface to drill against (see figure below), and drilled the holes.I mean, really, whatever fate lies ahead for him on that spaceship can't be any worse than the captive bolt pistol awaiting him when Farmer Brown gets a hankering for some brisket. And by that I mean I grew up squashing them and rubbing their bioluminescence on my arms and legs so I too could glow like a superhero or anomaly of evolution. These are primary colors and can be layered to create other colors like purple, orange, dark green, etc.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop